Wireless Universal 433 Mhz RF Remote Control /433 Mhz EV1527 Learning code Remote Control 4 Channel For Gate Garage Door
 433 Mhz EV1527 Learning code Remote Control
1, working voltage: DC12V 10A
2. Working frequency: 433MHz
3, coding chip: EV1527 (learning code)
4, the number of buttons: 4 keys (on / off lock)
5, volume: 54.5mm times 29.5mm times 13.8mm
Remote control switch, anti-theft alarm, remote control door lock, remote control electric shutter door and window, wireless remote control garage door, wireless remote control shutter, wireless remote control gate and so on.
Tips & Notices:
Match transmitter type: EV1527
If your transmitters are not using the encoding EV1527, they will not be connection successfully
Please do not use this remote control to clone other remote controls,
you will lose the built-in EV1527 encoding and this remote control will workless.
 Universal 433 Mhz/315MHZ RF Remote Control
1, can copy the chip:
Compitable for 2260, 2262, PT2264, 5326, SC5262, HT600, HT680, HT6207, HT6010, HT6012, HT6014, SMC918 series, 527, 1527, 2240, HCS101, HCS200HCS201, HCS300HCS301 (partial code), part of single chip microcomputer
Press the “A” button and the “B” button at the same time, the LED indicator flashes three times, release the pressed “B” button, the “A” button is not loose, click the released “B” button three times, the LED indicates The light enters the fast flashing state. At this time, the memory data is completely cleared. After the data is cleared, the LED indicator is not lit no matter which button is pressed.
3, the copy method:
One hand holds the original remote control, the other holds the remote control, and the two remotes are as close as possible. (ideally, the two remotes are placed on the desktop with the zero distance on the side.) Press the desired button. The LED indicator flashes rapidly after three flashes, and the copy is successful. The other buttons operate in the same way. Some remote controllers have a small transmitting power, and they should be back-to-back operated with the original remote control and the remote control. Some operating environments have interference, and should avoid the interference operation. If the copying is not good, copy it again after clearing the code. (It's especially important: the remote control on your hand must work properly and be the same frequency as our remote control)